How can I avoid mould on my masturbator?

Why is my masturbator mouldy even though I've dried it?

This is rare but not impossible.

We know that mould needs moisture and temperature.So all you need to do is isolate one of these conditions and mould won't grow.

So what should we do to avoid it?

Mouldy masturbators often become mouldy when they are not properly dehumidified after cleaning, and although you have tried very hard to wipe off the water, there is still a lot of water vapour inside.

If this water vapour remains in the channel, coinciding with hotter weather, the air humidity will be higher and there will still be the possibility of mould growth.

The most important thing to avoid when storing is a sealed, airtight environment.

Some people are worried about bacteria getting in, so they deliberately get completely sealed ziplock bags, this method is not right.

The water vapour inside the masturbation cup, which can't evaporate, can breed bacteria in large quantities in a sealed environment.

Preservation in a tin box, although with a lock, is more secure, not easy to find, but it is also airtight, not conducive to the escape of water, a little better than a completely closed environment.

King - 7 Vacuum Sucking for Oral Sex LCD Display Masturbator Sex Toys

£49.99£79.99

View

The most important thing to remember is to clean the masturbator after each use, using an absorbent pad, preferably two at a time, to ensure that the inside is completely dry.

Finally, put it in a container with maintenance powder.

What I recommend is to store it in a small, very breathable bag, such as a non-woven bag Or a cloth box, which is cheap and moisture-proof. Choose light colours and watch out for stains.

If you put it in a box, find a place to let it dry for a while before you put it away.

The purpose of drying for a while is to allow the water vapour in the gutter to evaporate.

Bestvibe 30s Quick Dry Hygroscopic Rods

£8.09£8.99

View

You can also put a few packets of desiccant in the iron box, and if you don't have an absorbent stick to soak up the water, remember not to turn it inside out.

Turning it inside out is good for the evaporation of water vapour, but it will make the entrance to the masturbation cup twist and crack.

If you're in a hurry and don't want to leave it outside for a while, you can use a hairdryer to blow cold air into the channel for a while, and the cold air will not affect the masturbation cup.

-End-